Honeywell Chadwick-Helmuth 177M-6A Balancer Kit PN: 177M-6A

Honeywell Chadwick-Helmuth 177M-6A Features and Specifications *

• Power Cable - connects to the aircraft's 12 or 28 VDC supply
• Receptacles - for cable from transducer and magnetic pickup from the left prop
• Receptacles - for cable from transducer and magnetic pickup from the right prop
• Magnetic Pickup Switch - "independent" position creates two independent circuits  enabling the user to record balance reading from two propellers in one "run." The "common" position is used for helicopter work where two transducers are referenced  to one magnetic pickup.
• Function Switch - selects propeller track function, or either left or right balance circuits
• IPS Meter - shows vibration level
• RPM Tune Dial - tunes the band pass filter to the RPM of the vibration
• RPM Range Switch - multiplies RPM of the RPM tune dial reading by factors of 1,   10, and 100
• Push For Scale #2 - when depressed, changes IPS meter sensitivity from 0 to 1.0 IPS to 1.0 to 10.0 IPS
• Verify Tune Button - used in conjunction with RPM tune dial to adjust balancers band pass filter to theexact propeller or vibration frequency.
• Interrupter Logic Switch - single position is used for propeller balance work and the double position for most helicopter smoothing
• Test Button - verifies magnetic pickup signal and proper phazor operation
• Phazor - reads phase angle (or clock angle) between transducer and magnetic pickup signals 

* Honeywell Chadwick-Helmuth 177M-6A technical specifications is provided for reference only. Avionteq cannot ensure accuracy of the technical specifications presented herein. The technical data may not relate entirely to all model and versions of the 177M-6A such as the models sold by Avionteq.

Buy, sell, trade-in or rent Honeywell Chadwick-Helmuth 177M-6A Balancer Kit.

Avionteq offers both new and refurbished or used Honeywell Chadwick-Helmuth 177M-6A, 177M-6B and 177M-6C Balancer Kits for sale or rent at most competitive price. All refurbished equipment are thoroughly tested and come with our warranty and fresh calibration certificate (when required). You can also sell your excess / surplus Honeywell Chadwick-Helmuth 177M-6A or receive trade-in credit towards purchase of other test equipment.