WarrantyWarranty    SupportSupport    CalibrationCalibration   





Quick Request For Quote

  If for rental, state length and start date

Add other items to the RFQ   Add to RFQ

I have equipment to trade-in   Add to Trade-In

Buy, sell, trade-in or rent LinAire LI-2/LI-3 Inverter Load Test Panel


Avionteq offers both new and refurbished or used LinAire LI-2/LI-3 Inverter Load Test Panel for sale. All refurbished equipment are thoroughly tested and come with our warranty and fresh calibration certificate (when required). You can also sell your excess / surplus LinAire LI-2/LI-3 or receive trade-in credit towards purchase of other test equipment.


LinAire LI-2/LI-3 Features and Specifications *


The Inverter Test Panel is a resistor load bank with input and output metering.

Input voltage (0-30 DC) and input current (0-100 Amp) are metered on the panel. The DC input power is protected by a 50 Amp circuit breaker. The power is connected to the inverter through a 3 pin connector and controlled by the panel ON/OFF switch which operates a high current relay.

The load bank is fan-cooled. Both the fan and relay operate at either 115V AC (LI-3) or 230V AC (LI-2) 50-60 Hz.

The inverter's output voltage and current for both 26VAC and 115VAC 440Hz are metered on the panel. There are 5 loads (175VA each) selectable for the 115V AC and 1 load (70VA) for the 26V AC inverter outputs. The outputs are circuit breaker protected.

Tip Jacks allow for scope connection to view the waveform.


* LinAire LI-2/LI-3 technical specifications is provided for reference only. Avionteq cannot ensure accuracy of the technical specifications presented herein. The technical data may not relate entirely to all model and versions of the LI-2/LI-3 such as the models sold by Avionteq.

Van Nuys Airport (VNY), Van Nuys, CA 91406 USA