WarrantyWarranty    SupportSupport    CalibrationCalibration   





Quick Request For Quote

(If different from above) 
  If for rental, state length and start date

Add other items to the RFQ   Add to RFQ

I have equipment to trade-in   Add to Trade-In

Buy, sell, trade-in or rent Viavi / Aeroflex ATC-1200Y3 DME/Transponder test set


Avionteq offers both new and refurbished or used Viavi / Aeroflex ATC-1200Y3 DME/Transponder test set for sale or rent at most competitive price. All refurbished equipment are thoroughly tested and come with our warranty and fresh calibration certificate (when required). You can also sell your excess / surplus Viavi / Aeroflex ATC-1200Y3 or receive trade-in credit towards purchase of other test equipment.


Viavi / Aeroflex ATC-1200Y3 Features and Specifications *

The Aeroflex / IFR ATC-1200Y3 avionics test equipment is a bench tester which contains a built-in crystal-controlled signal generator, attenuator and modulators. It is intended to work in combination with a dual trace oscilloscope to give a absolute bench test of the necessary features of civil ATC Transponders and DME sets. The ATC-1200YE system is capable of simulating a DME or Transponder ground station.


The Test Set has all the RF hardware to test a DME or Transponder. This hardware has a circulator to lead the transmitter power to a dummy load and power monitor, and to lead the signal generator to the receiver in the DME or Transponder. RF monitors are incorporated for looking the transmitter output and the input to the receiver. A diode switch in sequence with the signal generator is used to modular the signal generator to acquire above 80 dB on-off ratio for the transponder interrogation and above 85 dB on-off ratio in DME mode.


  • Measures peak power and transmitter frequency
  • 0.01 mile digital ranging steps from -1 to 999.89 NM
  • 10 KT velocity steps from 0 to 9990 KTS
  • Paired VOR (108.0 - 139.95 MHz) or direct frequency (950 - 1225 MHz) readout
  • Echo on DME mode
  • All present and future DME channels
  • Suppressor pulse output in XPDR and DME modes
  • Crystal-controlled, leveled L Band generator
  • Crystal-controlled, digital selection of distance and velocity
  • Weight: 36 lbs.
  • Dimensions: 7.5" H x 16.75" W x 18.375" D
  • AC Power Requirements: 105 to 120 VAC or 220 to 250 VAC, 50 to 400 Hz. Cooling fan 50/60 Hz only.


* Viavi / Aeroflex ATC-1200Y3 technical specifications is provided for reference only. Avionteq cannot ensure accuracy of the technical specifications presented herein. The technical data may not relate entirely to all model and versions of the ATC-1200Y3 such as the models sold by Avionteq.

Van Nuys Airport (VNY), Van Nuys, CA 91406 USA