Viavi/Aeroflex/ATG/Atlantic DATATRAC 400H ARINC 429 Databus Analyzer PN: DT-400H

Viavi / Aeroflex / ATG / Atlantic DATATRAC-400H Features and Specifications *

The Viavi / Aeroflex / ATG / Atlantic DATATRAC 400H  data bus analyzer is the miniaturized version of the DT400 providing the same powerful capabilities and field-proven features including breakpoint troubleshooting mode, 16-label recorder, 128-label transmitter, RS-232C port, D/A conversion, Williamsburg protocol analyzer and much more in a lightweight, durable analyzer.

The advantages of this portable bus analyzer's large display screen are:

• The LCD display is backlit for easy viewing anywhere, and batteries permit over six hours of operation between recharges.
• Bite messages. The 16-line display easily accommodates the ARINC 604 normal or interactive mode formats. Also, 350- label maintenance information can be read using a pre-stored database for 700 series equipment. Record up to 240 screens for later download to a PC/printer. The BITE mode supports systems on 737-300, 747-400, MD-11, and A320/330/340.
• Playback Options. Graphic plots, data lists, DAC, RS-232C
• Many labels simultaneously displayed. Data from two buses can be displayed in nine formats: hex, binary, ASCII, engineering units, user programmed, etc. Database conforms to 429-15 and includes Boeing labels for AVM, EIS, EICAS, FSEU, and FQIS.
• User-friendly operation. User-friendly operation is only possible when the display screen can accommodate complete setup menus and help screens.

Transmitter:

• Ports: 1
• Output Levels: ± 10.0 VDC (A to B)
• Bus Frequency: 12.5 kHz or 100 kHz
• Word Update: 1 ms to 10 sec (selectable)
• Output Impedance: 75 ohms
• Burst Mode: 01 to 99 burst output at selectable rate
• Display Format: Engineering units with pre-stored scaling based on equipment IDs, hexadecimal (full or data field); binary (full or data field); user defined; or ASCII character
• Transmit Word Gap: 4 bits
• Maximum Words: 128 per channel
• Dynamic Transmit: Repeat pattern of ramps and flat segments. Levels programmable between ± full scale and segment times or 0 to 999.999 sec

Receiver:

• Ports: 2
• Input Levels: ± 6.5 VDC to ± 13.5 VDC (A to B)
• Input Impedance: 12.0 Kohms
• Word Update: 1 ms to 10 sec, update rate displayed as instantaneous, min or max value
• Bus Frequency: 12-14.5 kHz or 100 kHz (selectable)
• Display Format: Engineering units with pre-stored scaling based on equipment IDs, hexadecimal (full or data field); binary (full or data field); user defined; graphic plots; or ASCII character
• Bus Activity Monitor: Monitors loss of individual words; sensitivity selectable
• Maximum Words: 256 per SDI per channel
• Real-time Download/Conversion: RS-232C or 12-bit DAC port

Record:

• Channels: Up to 16
• Record Capacity: 120 Kbytes (e.g., 8.5 hours of single label at 1/sec)
• Sample Interval: 1 ms to 10 sec (selectable)

Breakpoint:

• Data Conditions: EQ, NEQ, OR, GT, LT, /GT/, /LT/
• Label Sequence: A, B, A or B, A then B, B then A
• Event Count: 1 to 99 before break History: Up to 24,540 words in a programmable window about the breakpoint; selectable time stamp
• Trigger Pulse: 5V, 0.02 ms
• Trigger Pulse: 5V, 0.02 ms

* Viavi / Aeroflex / ATG / Atlantic DATATRAC 400H technical specifications is provided for reference only. Avionteq cannot ensure accuracy of the technical specifications presented herein. The technical data may not relate entirely to all model and versions of the DT-400H such as the models sold by Avionteq.

Buy, sell, trade-in or rent Viavi / Aeroflex / ATG / Atlantic DATATRAC 400H  ARINC 429 databus analyzer

Avionteq offers both new and refurbished or used Viavi / Aeroflex / ATG / Atlantic DATATRAC-400H  ARINC 429 databus analyzer for sale or rent at most competitive price. All refurbished equipment are thoroughly tested and come with our warranty and fresh calibration certificate (when required). You can also sell your excess / surplus Viavi / Aeroflex / ATG DT-400H or receive trade-in credit towards purchase of other test equipment.