Ideal Aerosmith 1281 Single-Axis Rate Table

1281 (Ideal Aerosmith) Features and Specifications *

The 1281 Single Axis Position and Rate Table System is designed to provide precise position, rate, and acceleration motion for development or production testing of inertial sensors. The 1281 was specifically designed for testing today’s considerably smaller inertial sensors and systems.

Accurate and reliable motion control of the 1281 test table is achieved with a servo-controlled system consisting of a direct drive brushless torque motor, a precision absolute encoder, and an internal microprocessor-based motion control system. Position, rate, and acceleration are commanded from a host PC (not provided) via the RS-232 or Ethernet communication interfaces. The user can utilize an Ideal-provided LabVIEW™ Application Program or their own communication software package with Ideal’s software (ATL command set) to control the 1281.

The Ideal Aerosmith 1281 price and features make it a very attractive option compared to similar axis rate and positioning tables available on the market.

Features

• Position Accuracy: ±50 Arc Sec
• Position Repeatability: ±25 Arc Sec
• Rate Accuracy over 360°: ±0.01%
• Maximum Rate: 1,000 deg/sec
• Tabletop Diameter: 12 inches (305 mm)
• Direct drive brushless motor
• 34 line slip ring
• Digital closed loop servo control
• RS-232 and Ethernet Control Interface
• LabVIEW™ Interface
• User-friendly Ideal Aerosmith Table Language (ATL)
• Tests in a Vertical or Horizontal Configuration
• Precision-ground anodized aluminum tabletop
• Sinusoidal Motion with programmable frequency and amplitude
• Capable of querying the current position and velocity
• Indicator LEDs: Power, Error, Servo Active, E-Stop Button, and E-Stop External
• CE Listed

Options

• Pedestal for floor mounting
• Custom fixture plates
• Mating connector kit
• Custom mounting hole patterns

Specifications

• Table Surface Characteristics
  • Diameter, in (mm): 12 inches (305 mm)
  • Hole Pattern: Square pattern 10-32 UNF threaded on 3 inch centers
  • Face Flatness: 0.003 inches (0.076 mm) TIR
  • Face Runout: 0.003 inches (0.076 mm) @ 3 inch (76.2 mm) Radius
  • Material: Aluminum, black anodized
  • Surface Finish: 32 RMS
  • Usable tabletop surface: 12 inches in diameter
  • Axis Wobble, arc sec: <20
• Test Load Capacity
  • Vertical Orientation: 50 lbs. (22.7 kg) centered
  • Horizontal Orientation: 25 lbs. (11.3 kg) CG < 3 inches
• Electrical Access to the UUT
  • Slip ring lines: 34 lines at 2A each (17 twisted shielded pair)
  • Slip ring resistance variation per line, with table rotating at 30 deg/sec.: 60 milliohms
  • Connectors: Tabletop: (1) 37pin Female D-sub connector Base: (1) 37pin Male D-sub connector
• Test Table
  • Tabletop Height: 12.5 to 13.0 inches (317.5 to 330.2 mm)
  • Leveling Range: +/- 1 degree
• Controller: NOTE: A user supplied PC with RS-232, or Ethernet is required
  • Type: Internal
  • Communication Interface: RS-232 (Max 115,200 Baud), Ethernet (10/100TX))
  • Control Language: ATL commands via host PC
• Operating Environment
  • Temperature: 50 to 95º F (10 to 35º C)
  • Relative Humidity: 20% to 85% non-condensing
• Non-Operating Environment
  • Temperature: -20 to 120º F (-29 to 49º C)
• Power Requirements: IEC 60320 Power Entry Connection 115/230VAC ± 10%, 1Ø, 50/60 Hz, 3A(FLA), 5A Fused, 5kA SCCR

BASIC INFORMATION

CHARACTERISTICS

* Ideal Aerosmith 1281 technical specifications is provided for reference only. Avionteq cannot ensure accuracy of the technical specifications presented herein. The technical data may not relate entirely to all model and versions of the 1281 such as the models sold by Avionteq.

Buy, sell, trade-in or rent Ideal Aerosmith 1281 Turn And Tilt Table.

Avionteq offers both new and refurbished or used Ideal Aerosmith 1281 Single-Axis Rate Table for sale or rent at most competitive price. All refurbished equipment are thoroughly tested and come with our warranty and fresh calibration certificate (when required). You can also sell your excess / surplus Ideal Aerosmith 1281 or receive trade-in credit towards purchase of other test equipment.