Laversab 6600-NG Air Data Test Set, RVSM, Automated, 3 Outputs, AOA, Wifi-enabled

6600-NG (Laversab) Features and Specifications *

The Laversab 6600-NG is an automatic pitot static test set with three outputs: one pitot output (Pt), one Static output (Ps1) and a third output (Ps2) which can be used to simulate either AOA (angle of attack) or AOS (angle of sideslip). This instrument is designed to test aircraft with “Smart Probes” efficient of measuring AOA using Air Data.

The 6600-NG is WIFI-enabled and can be used wirelessly using an iPad. Using the light-weight and portable remote a user can operate the tester from the cockpit and test the entire pitot and static system of the aircraft. The use of “Profiles” feature makes it possible for the operator to run through a test using only a single key on the remote.

The Laversab 6600-NG price and features make it a very attractive option comparing to similar air data test sets available on the market.

• Integrated high-capacity dual vacuum pumps and pressure pump offer the pressure and vacuum source for the unit.
• "Profiles" feature - A profile of set-points can be downloaded from a PC, which allows the user to step through the set-points by a single key. Each profile can have up to 50 set-points and 12 profiles can be kept in the unit.
• "Jog" and "Hold" features - Set-points can be "jogged" up or down in small increments. Ramping to a set-point can be put on "hold" and controlled at the existing measured value.
• Automated operation - Just enter the target set-points for the three outputs and the unit automatically achieves the targets, ramping at the programmed rates. Control at the set-point is stable within ± 1 foot, ± 0.1 knot or ± 0.001 inHg
• Three Outputs - In addition to the Primary Static and Pitot outputs, a third output is provided. This output can be used as a secondary static, a differential static or secondary pitot. This output is allowing the user to generate a second altitude (in feet or mtrs), a second absolute pressure (in inHg or mbar), a differential pressure for simulating AOA (in Diff. inHg or Diff mbar) or a differential pressure for generating a second airspeed (in knots or kmph) to simulate AOS. When the third output is not used, the tester operates accurately like our 2-output tester (Model 6300)
• RVSM compliant - The high accuracy of the tester and NIST-traceable calibration make the tester fully RVSM-compliant and fit for use on all RVSM-compliant aircraft.
• "Ground" feature - Brings Pitot and Static outputs to ambient "ground" pressure after completing a test.
• Leak checks Leak-checks can be done independently on any of the three outputs. The display of "instant" leak rates provides immediate feedback to the user.
• Manual Vent - The tester includes precision metering valves to allow manual venting of all three outputs, in the event of power-loss

* Laversab 6600-NG technical specifications is provided for reference only. Avionteq cannot ensure accuracy of the technical specifications presented herein. The technical data may not relate entirely to all model and versions of the 6600-NG such as the models sold by Avionteq.