MIZ-21C-SF (Zetec 111A901-00) Features and Specifications *

The Zetec MIZ-21C-SF is a single-frequency Eddy Current tester designed to provide unparalleled inspection capabilities. This handheld device is equipped with a high-quality input that supports Conductivity, ensuring accurate and reliable results in various inspection scenarios. The system's conductivity frequency range of 60, 120, 240, and 480 kHz allows for precise measurements across a wide spectrum of materials and applications. One of the standout features of the MIZ-21C-SF is its automatic probe recognition and setup functionality, facilitated by the innovative Zetec ID Chip technology. This streamlined process enhances efficiency and reduces setup time, enabling inspectors to focus on the inspection task at hand. Additionally, the system's multi-touch display, with a resolution of 480 x 640 pixels, provides a user-friendly interface for easy operation and data visualization.

The MIZ-21C-SF is designed for maximum portability and convenience, with a compact size of 267 × 122 × 38 mm (10.5 × 4.8 × 1.5 in) and a weight of 1.2 kg (2.6 lb) including batteries and cover. This lightweight and ergonomic design makes it easy to handle and maneuver, even in tight or hard-to-reach inspection areas. The system's battery life of up to 10 hours ensures extended operation time without the need for frequent recharging. The Zetec 111A901-00 offers USB 2.0, Wi-Fi, and Bluetooth options, enabling seamless data transfer and communication with external devices. This connectivity versatility enhances the system's flexibility and compatibility with various inspection setups and environments. The system's 18-Pin Lemo Eddy Current Connector and 26-Pin Lemo Eddy Current Array Connector ensure reliable and secure connections for accurate data acquisition.

The Zetec MIZ-21C-SF is equipped with advanced features such as adjustable alarms, receiver gain settings ranging from 10 to 173 dB, and phase adjustment from 0 to 359.9° in 0.1° increments. These customizable settings allow inspectors to fine-tune the system according to specific inspection requirements, ensuring optimal performance and data quality. Additionally, the system's data resolution of 16 bits and internal storage capacity of 128 GB provide ample space for storing inspection data and results. The 111A901-00 supports injection modes including Continuous and Super-Multiplex, offering flexibility in signal acquisition and analysis. The system's probe drive of 50 Ohm and a wide range of filters, including Median, High Pass, Low Pass, and Bandpass, further enhance its versatility and adaptability to different inspection scenarios.

The Zetec MIZ-21C-SF price and features make it a very attractive option comparing to similar eddy current testers available on the market.

Features

• Fully integrated single frequency design for conductivity inspections.
• Automatic probe recognition and setup with Zetec ID Chip technology.
• Multi-touch display with a resolution of 480 x 640 pixels for intuitive operation.
• Compact and lightweight design for portability and ease of handling.
• Long battery life of up to 10 hours for extended operation.
• Connectivity options including USB 2.0, Wi-Fi, and Bluetooth for seamless data transfer.
• Adjustable alarms, receiver gain settings, and phase adjustment for customization.
• Injection modes such as Continuous and Super-Multiplex for signal flexibility.
• Wide range of filters for signal processing and analysis.
• Internal storage capacity of 128 GB for data storage.

Capabilities

• Conductivity inspections across a frequency range of 60, 120, 240, and 480 kHz.
• Precise and reliable measurements for various materials and applications.
• Streamlined setup process for efficient inspection workflows.
• User-friendly interface for easy operation and data visualization.
• Versatile connectivity options for enhanced compatibility with external devices.
• Customizable settings for fine-tuning inspection parameters.
• High data resolution of 16 bits for accurate data acquisition.
• Support for different probe types and configurations.
• Reliable and secure connections for data acquisition.
• Enhanced inspection performance in diverse environments.

Specifications

• Size: 267 × 122 × 38 mm (10.5 × 4.8 × 1.5 in).
• Weight: 1.2 kg (2.6 lb) including batteries and cover.
• Eddy Current Connector: 18-Pin Lemo.
• Eddy Current Array Connector: 26-Pin Lemo.
• Battery Life: Up to 10 hours.
• Frequencies Per Timeslot: 1.
• Data Channels: 32.
• Maximum Probe Coils: 2.
• Frequency Range: 5 Hz to 10 MHz.
• Generator Output: Up to 12 Vpp (19 Vpp for ECA).

MIZ-21C Models:

• MIZ-21C-SF - Single frequency, conductivity
• MIZ-21C-DF - Dual Frequency, Conductivity, Rotating Scanner
• MIZ-21C-Array - Dual Frequency, Conductivity, Rotating Scanner, Eddy Current Array (ECA)

BASIC INFORMATION

CHARACTERISTICS

* ZETEC MIZ-21C-SF technical specifications is provided for reference only. Avionteq cannot ensure accuracy of the technical specifications presented herein. The technical data may not relate entirely to all model and versions of the MIZ-21C-SF such as the models sold by Avionteq.